Searching For A Recording By Date; Date Search - Sony DCR- Operating Instructions Manual

Searching for a recording by date

– DATE SEARCH

Your camcorder can automatically search for the point where the recording date
changes and starts playback from that point.
Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
JUL 4 2003
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the DATE
SEARCH indicator appears on the screen. The indicator changes as follows:
DATE SEARCH y (no indicator)
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t (no indicator)
(3) When the current position is [b], press . to search toward [a] or press >
to search toward [c]. Your camcorder automatically starts playback at the point
where the date changes.
Each time you press . or >, your camcorder searches for the previous or
next date.
2
SEARCH
MODE
3
To stop searching
Press x.
90
JUL 5 2003
[a] [b]
DATE 00
SEARCH
DATE 01
SEARCH
DEC 31 2003
[c]