Recording Superimposed Images On A Tape - Sony DCR- Operating Instructions Manual

Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX

Recording superimposed images on a tape

Before operation
•Insert a tape for recording into your camcorder.
•Insert a "Memory Stick" containing still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) In the standby mode, press MEMORY MIX.
The first recorded image appears in the bottom-right corner of the screen as a
thumbnail image. The last image that is used in MEMORY MIX will be
displayed next time.
(3) Press MEMORY+/– to select the still image you want to superimpose.
– : To see the previous image
+ : To see the next image
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still image overlaps with the picture on the screen.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM
M. LUMI
C. CHROM
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect becomes.
(7) Press START/STOP to start recording.
2
MEMORY
MIX
M. CHROM
101
101–0021
Still image
– The degree of the blue areas in the still image which is to be
swapped with a moving picture
– The brightness of the area in the still image which is to be
swapped with a moving picture
– The degree of the blue areas in the moving picture which is to
be swapped with a still image
3
START/STOP
4
5
6
M. LUMI
101
101–0021
M. LUMI I I I • • • •
101
101–0021
M. LUMI I • • • • • •
101
101–0021
141