Trouble Shooting - Farmi Forest Corporation JL 351P Operation, Maintenance And Spare Parts Manual

Skidding winch
Table of Contents

Advertisement

TROUBLE SHOOTING

CONDITION
Hard to pull the cable out
Cable gets tangled on the drum.
Cable develops kinks.
Roller chain comes off.
Rattling sound
Tractor slides backwards when
winching
JL 351P
POSSIBLE CAUSE
Drum brake is too tight.
Cable too loose on the drum.
The cable is pressed between
loose loops.
Cable brake too loose
Roller chain too loose, some
part is broken or the aligning is
incorrect.
Roller chain too tight, some
part is broken or the aligning is
incorrect.
Normal wear of the clutch.
Minimum thickness of the clutch
plates is 7 mm.
Oil or grease in the clutch
Clutch too loosely adjusted
Parking brakes are not on.
Dozer blade does not anchor the
24
REMEDY
Loosen the drum brake. See
instructionsfrom item "Adjusting
the drum brake".
Loosen the pin and pull the
cable from the reel with the
help of a tractor. Reel the cable
tightly back in with the help of
the load.
Tighten the drum brake.Tighten
cable on the drum by pulling out
the cable and by winching with
a heavy load.
Check the aligment of the
chain. Check possible damages.
Adjust the roller chain, change
if necessary. See chapter
"Adjusting the roller chain".
Check the aligment of the
chain. Check possible damages.
Adjust the roller chain, change
if necessary. See chapter
"Adjusting the roller chain".
See chapter "Clutch
adjustment"
Disassemble and clean the
parts.
Adjustment of the clutch. See
chapter "Clutch adjustment"
Lock on the parking brakes.
Lower the winch all way to the
ground.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jl 501

Table of Contents