Configuring Ntdp-Related Parameters; Enabling The Cluster Function - H3C S7500 Series Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
Enter system view
Enable NTDP globally
Enter Ethernet port view
Enable NTDP for the
Ethernet port

1.2.5 Configuring NTDP-Related Parameters

Follow these steps to configure NTDP parameters:
Enter system view
Configure the range within
which topology information
is to be collected
Configure the hop delay to
forward topology-collection
requests
Configure the port delay to
forward topology collection
requests
Configure the interval to
collect topology information
Quit system view
Start topology information
collection

1.2.6 Enabling the Cluster Function

Follow these steps to enable the cluster function:
To do...
system-view
ntdp enable
interface interface-type
interface-number
ntdp enable
To do...
Use the command...
Use the
command...
system-view —
Optional
ntdp hop
By default, the hop range for
hop-value
topology collection is three hops
Optional
ntdp timer
By default, the delay of the device
hop-delay time
is 200 ms
Optional
ntdp timer
port-delay time
By default, the port delay is 20 ms
Optional
ntdp timer
interval-in-minut
By default, the interval of topology
es
collection is 0.
—
quit
ntdp explore Optional
1-8
Chapter 1 Cluster
Remarks
—
Required
—
Required
Remarks