Member Device Configuration; Member Device Configuration Task List; Enabling Ndp Globally And For Specific Ports; Enabling Ntdp Globally And For Specific Ports - H3C S7500 Series Operation Manual

Cluster
Hide thumbs Also See for S7500 Series:
Table of Contents

Advertisement

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
Configure the TFTP server for the
cluster
Configure the logging host for the
cluster
Configure the SNMP host for the cluster

1.3 Member Device Configuration

1.3.1 Member Device Configuration Task List

Complete the following tasks to configure a member device:

Enabling NDP Globally and for Specific Ports

Enabling NTDP Globally and for Specific Ports

Configure Member Devices to Access FTP/TFTP Server of
the Cluster
1.3.2 Enabling NDP Globally and for Specific Ports
Follow these steps to enable NDP globally and for specific ports:
Enter system view
Enable NDP globally
Enable
NDP for
specified
ports
1.3.3 Enabling NTDP Globally and for Specific Ports
Follow these steps to enable NTDP globally and for specific ports:
To do...
Task
To do...
In system view
Enter
In
Ethernet
Ethernet
port view
port
Enable NDP
view
on the port
Use the command...
tftp-server ip-address
logging-host
ip-address
snmp-host ip-address
Use the
command...
system-view
ndp enable
ndp enable
interface port-list
interface
interface-type
interface-number
ndp enable
1-11
Chapter 1 Cluster
Remarks
Optional
Optional
Optional
Remarks
Required
Required
Required
Remarks
Required
Required
You can choose to
enable NDP in system
view or in Ethernet port
view

Advertisement

Table of Contents
loading

Table of Contents