Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
When configuring cluster, go to these sections for information you are interested in:
Cluster Overview
Management Device Configuration
Member Device Configuration
Intra-Cluster Configuration
Displaying and Maintaining a Cluster
Cluster Configuration Example
1.1 Cluster Overview
1.1.1 Introduction to HGMP V2
A cluster is implemented through Huawei group management protocol (HGMP V2). By
employing HGMP V2, a network administrator can manage multiple switches using the
public IP address of a switch known as a management device. The switches under the
management are member devices. The management device, along with the member
devices, forms a cluster. Normally, a public IP address is not assigned to a member
device. Management and maintenance operations intended for the member devices in
a cluster are redirected by the management device.
cluster implementation.
Figure 1-1 Diagram for cluste
HGMP V2 offers the following advantages:
Chapter 1 Cluster
Network Management Station
Network
Management Device
Member Device
Member Device
Member Device
r
Figure 1-1
69. 110.1. 100
69. 110
.1.1
1-1
Chapter 1 Cluster
illustrates a typical