H3C S7500 Series Operation Manual page 18

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
<aaa_1.H3C> tftp cluster put bbb.txt
Note:
Upon the completion of the above configurations, you can execute the cluster
switch-to { member-number | mac-address H-H-H } command on the
management device to switch to member device view to maintain and manage a
member device. You can then execute the cluster switch-to administrator
command to resume the management device view.
You can also reboot a member device by executing the reboot member
{ member-number | mac-address H-H-H } [ eraseflash ] command on the
management device. For detailed information about these configurations, refer to
the preceding description in this chapter.
After the configuration above, on the SNMP host you can receive logs and SNMP
trap messages of all the cluster members.
1-17
Chapter 1 Cluster