H3C S7500 Series Operation Manual page 16

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
[H3C] ntdp enable
[H3C] interface Ethernet 1/1
[H3C-Ethernet1/1] ntdp enable
[H3C-Ethernet1/1] quit
# Enable the cluster function.
[H3C] cluster enable
2) Configure the management device
# Configure the IP address of the management VLAN (the S7500 series take VLAN 1
as the default VLAN).
<H3C> system-view
[H3C] interface Vlan-interface 1
[H3C-Vlan-interface1] ip address 163.172.55.1
[H3C-Vlan-interface1] quit
# Enable NDP globally and on ports GE 2/0/2 and GE 2/0/3.
[H3C] ndp enable
[H3C] interface GigabitEthernet 2/0/2
[H3C-GigabitEthernet2/0/2] ndp enable
[H3C-GigabitEthernet2/0/2] interface GigabitEthernet 2/0/3
[H3C-GigabitEthernet2/0/3] ndp enable
[H3C-GigabitEthernet2/0/3] quit
# Configure the holdtime of NDP information to be 200 seconds.
[H3C] ndp timer aging 200
# Configure the interval to send NDP packets to be 70 seconds.
[H3C] ndp timer hello 70
# Enable NTDP globally and for GE 2/0/2 and GE 2/0/3.
[H3C] ntdp enable
[H3C] interface GigabitEthernet 2/0/2
[H3C-GigabitEthernet1/0/2] ntdp enable
[H3C-GigabitEthernet1/0/2] interface GigabitEthernet 2/0/3
[H3C-GigabitEthernet1/0/3] ntdp enable
[H3C-GigabitEthernet1/0/3] quit
# Configure the hop count to collect topology to be 2.
[H3C] ntdp hop 2
# Configure the delay time for topology-collection requests to be forwarded on member
devices to be 150 ms.
[H3C] ntdp timer hop-delay 150
# Configure the delay time for topology-collection requests to be forwarded through the
ports of member devices to be 15 ms.
1-15
Chapter 1 Cluster