Web System
Serial Port Configuration
IP Configuration
44
Click Serial Port Configuration in the left pane and the following figure is displayed:
Figure 8-8 Serial Port Configuration
Serial Port1 Settings
•
Baud Rate – select the proper baud rate of for the serial port.
•
Parity – set the parity.
•
Stop Bits – select the proper stop bit.
•
Data Bits – select the proper data bit.
•
Serial Mode – select the proper mode for the serial port.
The same configuration can be made in "Serial Port2 Settings" section.
Click Apply to save the configuration; Cancel to give up the configuration; Default to restore
all default values.
Click IP Configuration in the left pane and the following figure is displayed:
Figure 8-9 IP Configuration