Operations - Honeywell Ultrakey Lite User Manual

Standalone Mode

Operations

32
Figure 7-10 DVR Control
Rotate the slider to select the needed user type, and then press Slider_Right to confirm.
Refer to
Note
Refer to
DVR selection
Pressing a number followed by the DVR key selects a DVR to control. This also selects the
first camera controlled on that DVR.
Display
Display function can make DVR rotates different Live or Search display grid displays.
Example: 4A, 4B, 4C, 4D, 9A, 9B, 16 division screen display.
You can directly press Split on the keyboard and the DVR rotates next grid display form
current grid display. For example: if the current grid display is 4B, if you directly press Split the
DVR will change into 4C grid display.
You can also press one or two of the number keys followed by the Split key to make DVR
change into any kind of grid display.
Example:
Press...
4+1 + Split
4+2 + Split
4+3 + Split
4+4 + Split
9+1 + Split
9+2+Split
1+6+Split
Auto sequence
The function can toggle Auto Sequence on FUSION DVR (ON/OFF).
Press Seq to toggle Auto Sequence on Fusion DVR.
Alarm out
The function can toggle Relay (Alarm output) on specified channel.
Press the number key which is less than 5 followed by Alarm key to toggle Relay on specified
channel.
Instant record
The function can toggle Instant Record on specified channel.
Press the number key which presents for the specified channel followed by Recycle key to
toggle Instant Record on specified channel.
Figure 7-3 for connecting PTZ by direct control.
Figure 7-2 for connecting PTZ by DVR control.
To display in...
4A grid
4B grid
4C grid
4D grid
9A grid
9B grid
16 grid