Upgrade - Honeywell Ultrakey Lite User Manual

Honeywell
Enter IP address, subnet mask, gateway and DNS.
Click Apply to save the configuration; Cancel to give up the configuration; Default to restore
all default values.

Upgrade

To upgrade the firmware of the keyboard, click the UPGRADE tab and the following figure is
displayed:
Figure 8-10 Upgrade
A warning window is displayed to remind you to make sure the network is connected during
the upgrade. Click OK to close the warning.
Select the corresponding firmware folder to be upgraded (application, FPGA, Kernel or slider
firmware) and specify the file. Click Send to start the upgrade.
Figure 8-11 Upgrade status (Erasing old files)
After erasing the old files, it starts coping new files as shown in the following figure:
45