Terminal Box - Honeywell Ultrakey Lite User Manual

Front Panel, Interfaces and Terminal Box
Serial Port
USB Port

Terminal Box

8
RS232, RS485 and RS422
Settings of serial ports can be configured in related menu items of the system.
Serial Port
COM1
COM2
Note:
COM1 and COM2 are respectively corresponding to ports on the LCD menu.
For configuration of Com1 and Com2, refer to
that COM1_RS422 and COM2_RS485 cannot be used at the same time.
It is recommended to add an isolated protective device when using
RS485/RS422 for outside plant.
USB Port should be used to connect a QWERTY USB keyboard and the
following USB keyboards are recommended:
Logitech Y-UR83 (Logitech Classic New Touch Keyboard 200 USB),
Y-BP62a and Dell L110
Ultrakey Lite can be connected with other devices by using the Terminal Box. Ultrakey Lite
Serial Port (RJ45) can be connected with Terminal Box's Back (RJ45) by using a network
cable.
Terminal Box Back
The terminal box has a DB9 (Male) for RS232 and can connect with Fusion DVR by DB9 or
HRXD by two Connector Adapters (for RS232) and a network cable. The terminal box also has
an 8 Pin terminal plug for easy connect with other devices.
Refer to the following figure for signal definition of the terminal box:
Type Pin
1
2
RS422
5
7
8
7
RS485
8
4
RS232
5
6
1
RS485
2
Terminal Box Front
Signal
Rx+
Rx-
GND
Tx-
Tx+
T/R-
T/R+
RXD
GND
TXD
T/R+
T/R-
"Serial Port" on page 12. Note