Copyright & Regulatory Information - Alcatel Speed Touch PC Installation Manual

Adsl modem card

Hide thumbs Also See for Speed Touch PC:

Table of Contents

System Requirements & Compliance Certification

System Requirements

IBM PC/AT or compatible

Pentium 100Mhz or faster

30Mbytes or more available hard disk space

2x CD-ROM drive or better

32Mbyte or more available system memory

Power Requirements

0.75A Max @ +5V ± 5%, 0.1A max @ ± 12V, ± 5%

Environmental Requirements

Operating Temperature: 0 °C to 70°C with airflow

Non-operating Temperature: -10 °C to 85 °C

Operating Humidity: 10% to 90% non-condensing

Non-operating storage humidity: 5% to 95% non-condensing

Compliance Certification

UL 1950

CE approved

FCC Part 15 Class B

manual may not be copied, in whole or in part, without written consent. All product

names are trademarks and or registered trademarks of their respective companies.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measure:

Reorient or relocated the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into a different outlet circuit from than the receiver.

Consult an experienced radio/TV technician for help.

Alcatel Speed Touch PC

Table of Contents