Windows Millennium - Alcatel Speed Touch PC Installation Manual

Windows Millennium

NOTE: After installing the ADSL modem card, plug the power cable back into the PC
system and turn the power on. Insert the driver CD upon restart.
1. The Add New Hardware Wizard
window will automatically appear to
indicate that a new PCI Network
Controller has been found. Select
the Specify the location of the
driver option. Click Next.
2. Still in the Add New Hardware
Wizard. Click the scroll arrow to
locate the driver on your CD-ROM
for the protocol supported by your
ADSL provider:
2364wME. (The example uses "D"
as the CD-ROM drive letter. Drive
letters may vary.) Then click Next.
3. The Add New Hardware Wizard
window now displays your newly
installed Alcatel Speed Touch PC.
Click Next.
4. The Add New Hardware Wizard
has now finished installing the new
hardware device. Click Finish
The System Setting Change window
5.
appears. Click Yes to restart your PC
system and to allow the new changes
to take effect. You must now set the
Alcatel Speed Touch PC
1483wME or
17