Windows 95A - Alcatel Speed Touch PC Installation Manual

Windows 95A

After installing the ADSL modem card, plug the power cable back into the PC system and
turn the power on.
Before you proceed to install drivers, you will need to upgrade your Dial-Up Networking
(DUN) application to version 1.3 or above. The Microsoft DUN is conveniently
contained on your ADSL Driver CD-ROM.
1. After restart, the New hardware found
will detect the ADSL modem as a PCI
Network Controller. CANCEL the New
hardware found window.
2. At your desktop, click Start, and then
select Run.
3. The Run window appears. Insert the
ADSL Driver CD, then click on Browse
and proceed to locate the ADSL Driver 95
CD-ROM. Then locate and select the
Msdun13.exe file. The Msdun13.exe
appears in the Open box. Click OK.
4. The Microsoft Dial-Up Networking 1.3
window appears with the message This
will install Microsoft Dial-Up
Networking 1.3 for Windows 95. Do
you wish to continue? Click Yes.
5. An End-User License Agreement will
appear. To accept, click Yes.
6. Back in the Microsoft Dial-Up
Networking 1.3 window. You will be
Alcatel Speed Touch PC
7