Connector Pin-out
The ADSL modem card is equipped with a RJ-11 jack for
connection to the ADSL data port. The center two pins, pins 2
and 3, are used for ADSL data. For the card to make a proper
ADSL connection, the installed ADSL data port should also use
pins 2 and 3 for data. If the ADSL data port installation uses pins
1 and 4 for data, then a wiring converter will be required. Do not
alter or remove the wiring converter if present. Consult with your
ADSL provider before attempting any wiring changes.
42
Alcatel Speed Touch PC