Alcatel Speed Touch PC Installation Manual page 36

7. The Network window will appear.
Click the Adapters tab to verify that
Alcatel Speed Touch PC has been
found. Click on the Protocols tab and
verify that ADSL Management and
Monitor Interface is present. When
you have verified these items, click
Close.
NOTE: To review the Network window
properties at any time, right-click the
Network Neighborhood icon and select
Properties.
NOTE: If no previous network devices
have been installed, then the Network
Neighborhood icon will not be present
on your desktop. To open the Network
window, double-click My Computer then
Control Panel, and then Network.
8. The Microsoft TCP/IP Properties
window appears. Enter in the IP Address,
Subnet Mask, and Default Gateway
supplied by your ADSL service provider.
Click OK.
9.
The Network Settings Change window
appears. You must now re-start your
computer for the settings to take effect.
Click Yes.
Alcatel Speed Touch PC
32