Alcatel Speed Touch PC Installation Manual page 39

lick OK.
7. The Setup Message window appears.
Click OK.
8. The Windows NT Setup window
appears. Insert your NT4.0 CD-ROM
into the PC system CD drive, and type in
"D:\i386" Click Continue.
9. The Add RAS Device window
appears. Click on the "Scroll arrow" to
locate IDSN1-Actlwana. Then Click
OK.
10.
The Remote Access Setup window
appears. Click Continue.
11. The Network window will appear.
Click the Adapters tab to verify that
Alcatel Speed Touch PC has been
found. Click on the Protocols tab and
verify that the ADSL Management
and Monitor Interface is present.
Then click Close.
NOTE: To review the Network
window properties at any time, right-
click the Network Neighborhood
icon and select Properties.
NOTE: If no previous network
devices have been installed, then the
Network Neighborhood icon will not
be present on your desktop. To open
Alcatel Speed Touch PC
the Network window, double-click
My Computer, then Control Panel,
.
35