Writing The Rc Time Code On A Recorded Tape (Ccd-Trv99 Only) - Sony CCD-TRV95 Operating Instructions (primary manual) Operating Instructions Manual

Writing the RC Time code on a recorded
tape
– CCD-TRV99 only
You can write the RC time code on a recorded tape. Use the Remote Commander.
Before you begin, we recommend to set COUNTER to TIME CODE in the menu system
so that you can view the RC time code.
(1) While pressing the small green button on the POWER switch, set it to VTR.
(2) Rewind the tape to the beginning and set the camcorder to playback pause
mode.
(3) Press TIME CODE WRITE on the Remote Commander. The TIME CODE
WRITE indicator appears in the viewfinder or on the LCD screen with the
WRITE indicator flashing.
(4) Press ( or P to start playback. The WRITE indicator stops flashing and the
RC time code writing starts from 0:00:00:00.
1
2
REW
To stop writing the RC time code
Press p (or any video control button).
76
3
POWER
TIME CODE
CAMERA WRITE
OFF
VTR VTR
PLAY
PAUSE
-:--:--:--
TIMECODE
WRITE
4
PLAY
PAUSE
0:00:00:01
TIMECODE
WRITE