Recording Still Pictures Successively (Ccd-Trv99 Only) - Sony CCD-TRV95 Operating Instructions (primary manual) Operating Instructions Manual

Recording still pictures successively
– CCD-TRV99 only
Using the flash motion function, you can record still pictures successively at constant
intervals. The sound is recorded normally.
(1) While the camcorder is in Standby mode or recording mode, press DIGITAL
EFFECT and turn the control dial until the FLASH indicator flashes.
(2) Press the control dial.
The FLASH indicator lights up and the flash motion bars appear.
(3) Turn the control dial to adjust the interval of flash motion. The intervals
increase with the number of the flash motion bars.
(4) Press START/STOP. Flash motion recording starts. When you stop recording,
press START/STOP again.
[a] normal recording
[b] flash motion recording
[a]
[b]
1
DIGITAL
EFFECT
FLASH
To cancel the flash motion function
Press DIGITAL EFFECT.
Notes on the flash motion function
•You cannot use the following functions during the flash motion recording.
– Functions using the FADER button
– Low Lux mode of PROGRAM AE
– Functions using the PHOTO button
•When you set the POWER switch to OFF, the flash motion function will be cancelled
automatically.
2
FLASH
3
4
START/STOP
47