Sony CCD-TRV95 Operating Instructions (primary manual) Operating Instructions Manual page 37

Using the FADER function
Using the fader function
When fading in [a]
(1) While the camcorder is in Standby mode, press FADER until the desired fade
indicator flashes.
(2) Press START/STOP to start recording. The fade indicator stops flashing.
When fading out [b]
(1) During recording, press FADER until the desired fade indicator flashes.
(2) Press START/STOP to stop recording. The fade indicator stops flashing, and
then recording stops.
The fading mode selected last is indicated first of all.
1
FADER
FADER
M.FADER
STRIPE
BOUNCE
Note on the bounce function
When you use the following functions or
D ZOOM is set to ON in the menu system, "BOUNCE" indicator does not appear.
– Wide mode
– Functions using the PICTURE EFFECT button
– Functions using the PROGRAM AE button
MONOTONE
OVERLAP
WIPE
2
START/STOP
37