Recording With The Date/Time - Sony CCD-TRV95 Operating Instructions (primary manual) Operating Instructions Manual

Re-recording a picture in the middle of a recorded tape
Notes on re-recording
•The picture and the sound may be distorted at the end of the inserted portion when it
is played back.
•If you re-record on the portion which contains non-recorded section, the zero memory
function may not work correctly.
•When the START/STOP MODE switch is set to 5SEC or
memory function.

Recording with the date/time

Before you start recording or during recording, press DATE or TIME. You can record
the date or time displayed in the viewfinder or on the LCD screen with the picture.
Press DATE (or TIME), then press TIME (or DATE) to display the date and time
together.
The clock is set to East Coast Standard Time at the factory. You can reset the clock in the
menu system.
DATE
JUL 4 1998
TIME
5:30:00 PM
To stop recording with the date and/or time
Press DATE and/or TIME again. The date and/or time indicator disappears. The
recording continues.
TIME
JUL 4 1998
5:30:00 PM
DATE
, you cannot use the zero
63