Sony CCD-TRV95 Operating Instructions (primary manual) Operating Instructions Manual page 73

Locating the marking position
Scanning the beginning of each marking position – index scan
(1) Press INDEX on the Remote Commander during normal playback.
(2) Press 0 or ). The tape rewinds or advances rapidly and plays back for
approximately 10 seconds from the point on which the index signal was
marked. If you want to continue playback, press (. When you do not press
any button, the tape is automatically scanned to the next program.
1
INDEX
To cancel index scan mode
Press (. Normal playback resumes.
INDEX 00
SCAN
2
REW FF
INDEX 00
SCAN
73