Changing Values For A Cooking Programme - Miele DG2740 Operating And Installation Instructions

Operation
Cleaning the steam oven
 If necessary, remove the condensate
tray from the oven compartment and
empty it.

Risk of injury caused by hot wa-
ter.
At the end of a cooking programme,
hot water left in the steam generator
is pumped back into the water con-
tainer.
Take care not to tip the water con-
tainer when taking it out of the appli-
ance.
 Remove the water container.
 Remove the spill guard and empty
the water container.
 After each use, clean and dry the
whole appliance as described in
"Cleaning and care".
Make sure the spill guard engages
correctly when installing it.
 Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
Insufficient water during a cooking pro-
gramme is indicated by the flashing
 symbol and a buzzer.
 Remove the water container and fill it
with fresh tap water.
 Push the water container back into
the appliance.
The cooking programme will continue.
26
Changing values for a cooking
programme
As soon as a cooking programme is in
progress, you can change the temperat-
ure and cooking duration for this pro-
gramme.
Changing the temperature
 Touch OK once.
The display will change to the temperat-
ure setting and the temperature will
flash.
 Touch the  or  sensors to change
the temperature.
 Confirm with OK.
Changing the cooking duration
 Touch OK twice.
The display will change to setting the
cooking duration and the number for
the hours will flash.
 Touch the  or  sensors to change
the cooking duration.
 Confirm with OK.