Start Recording While Checking The Subject On The Lcd Screen; View The Recorded Picture On The Lcd Screen - Sony Handycam CCD-TRV238E Operation Manual

3

Start recording while checking the subject on the LCD screen.

The date and time is not set up in the default setting. To set the date and time, see page 17.
a
Remove the lens cap.
Lens cap is not attached
when you purchase your
camcorder (p. 104).
b
Press OPEN and open
the LCD panel.
c
While pressing the
green button, slide the
POWER switch down
to light up the
CAMERA lamp.
The power turns on.
d
Press REC START/STOP.
Recording starts. To change
to standby mode, press REC
START/STOP again.
You can also use REC START/
STOP of the LCD panel.
4

View the recorded picture on the LCD screen.

a
Slide the POWER
switch repeatedly
until the PLAY/EDIT
lamp lights up.
b
Press
c
Press
start the playback.
To stop, press
To turn off the power, slide the
POWER switch up to (CHG)
OFF.
START/STOP
(rewind).
(play) to
.
9
Quick Start Guide