( Trv270E/285E) - Sony Handycam CCD-TRV238E Operation Manual

Recording still
images
– Tape photo recording

( TRV270E/285E)

You can record still images. Before
recording, follow steps 1 to 7 in "Getting
started" (p. 11 - p. 19).
OPEN PHOTO
POWER switch
1
Remove the lens cap. Pull the lens cap
string down and attach it to the grip
belt.
2
Press OPEN and open the LCD panel.
3
Slide the POWER switch to select the
CAMERA mode.
Slide the POWER
switch while pressing
the green button.
4
Press and hold PHOTO lightly.
You will hear a small beep sound, and the
picture will become a still image.
Recording does not start at this point.
60
CAPTURE
min
5
Press PHOTO fully.
A shutter sound is heard, and the image is
recorded with sound for 7 seconds.
The still image is displayed on the screen
until recording is completed.
To turn the power off
Slide the POWER switch up to (CHG) OFF.
b Note
• appears when the tape photo recording does
not work.
z Tip
• You can record about 510 images in the SP mode
and about 765 images in the LP mode on a tape
which can record for 60 minutes in the SP mode.
The indicator
appears.
25
Recording