Step 5: Setting The Date And Time - Sony Handycam CCD-TRV238E Operation Manual

Step 5: Setting the
date and time
Set the date and time when using this
camcorder for the first time. If you do not set
the date and time, the [CLOCK SET] screen
appears every time you turn on your
camcorder.
b Note
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may be
cleared from the memory. In that case, charge the
rechargeable battery (p. 100) and then set the date
and time again.
OPEN
SEL/PUSH
EXEC dial
1
Turn on your camcorder (p. 15).
2
Press OPEN and open the LCD panel.
Proceed to step 6 when you set the clock for
the first time.
MENU
POWER
switch
3
Press MENU.
MANUAL SET STBY
PROGRAM AE
P EFFECT
AUTO SHTR
[ MENU ] : END
4
Turn the SEL/PUSH EXEC dial to
select (SETUP MENU), then press
the dial.
SETUP MENU STBY
––:––:––
CLOCK SET
USB STREAM
LTR SIZE
LANGUAGE
DEMO MODE
RETURN
[ MENU ] : END
5
Turn the SEL/PUSH EXEC dial to
select [CLOCK SET], then press the
dial.
CLOCK SET STBY
Y M D H M
2005 1 1 0 : 0 0
[ MENU ] : CANCEL
6
Turn the SEL/PUSH EXEC dial to set
[Y] (year), then press the dial.
CLOCK SET
STBY
Y M D H M
2005 1 1 0 : 0 0
[ MENU ] : CANCEL
You can set any year up to the year 2079.
7
Set [M] (month), [D] (day), [H] (hour)
and [M] (minute) in the same way as
was done in step 6, then press the dial.
,continued
17
Getting started