Sony Handycam CCD-TRV238E Operation Manual page 61

For TRV270E/285E:
A/V OUT jack
A/V connecting cable (supplied)
Signal flow
* For TRV270E:
Your camcorder does not accept input data from the
connected device. It can only output data from the
DV Interface.
b Notes
• Use the A/V connecting cable to connect your
camcorder to other devices. Before connecting,
make sure the [DISPLAY] setting in the
(OTHERS) menu is set to [LCD] (the default
setting) (p. 59).
• For TRV238E/438E:
When you are connecting your camcorder to a stereo
device, connect the audio plug of the A/V
connecting cable to the left (white) jack on the VCR.
• For TRV270E/285E:
When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video jack, and the red
(right channel) or the white (left channel) plug to the
audio jack on the VCR.
Connecting with an i.LINK cable
i.LINK cable (optional)
DV Interface
Yellow
White
Red
To use an i.LINK cable for connection
For TRV270E/285E:
Use an i.LINK cable (optional) to connect your
camcorder to other device via the DV Interface.
The video and sound signals are transmitted
digitally, producing high quality pictures. Note
that you cannot record the picture and sound
separately. For details, see page 97.
i.LINK jack
VCRs
Dubbing/Editing
61