Operation; Control Panel - Dantherm CDF 40 Service Manual

Operation: Control panel

Control panel

Risk of electric shock
Warning
DANGER
An electric shock can cause severe burning and in most extreme cases shock to the brain,
strain to the heart, injury to other organs or result in death.
Caution
•
•
Accessing the
Follow the steps below in order to access the control panel.
control panel
Step
1
2
Display 4 digit Display divided into 2 sections: The first 2 digits show the code and the last 2 show the
value of the code.
Code
Default view
By default the display will show the relative humidity RH %. This reading can be from the
external humidity/temperature sensor when available, if not the RH will be from the internal
humidity sensor.

Operation

Switch off the power on the main switch, while you open the dehumidifier.
Remember also to switch off the power, while you close the dehumidifier.
Description
Open the dehumidifier:
a) Loosen the two screws at the bot-
tom of the unit. Check that the locks
release the front cover.
b) Pull upwards and remove the front
cover.
Loosen the two screws and remove the up-
per plate (covering the control panel).
Value
Illustration
b
Example
a
17