Lightning Protection International Lightning Warning System MKIII Installation And Operating Manual page 46

Step 7:
Disconnect your computer from the network and connect to the Console using the black cross-over
Ethernet cable supplied with the LWS MkIII Console.
Step 8:
Your computer has now been assigned the IP Address of 19.2.168.1.1 and can now access the LWS
console in a Firefox or Internet Explorer web-browser by entering the address 19.2.168.1.9.0 into the
address bar. You will now be able to access the Settings Page of the Console.
The page should render like the diagram.
At this point you should have established communication with the LWS via a direct connection.
Page 44
Document 36 II LWS-MKIII, pub V5 © Copyright 2012 LPI