Table of Contents
Advertisement
Settings:
IP Address
This page allows the user to change the IP Address, IP Mask, Gateway Address and DNS Address of
the console. The Address settings of the console can either be set by manually choosing preferred
values or by setting the console to automatically download Addresses from a local connected DHCP
server. When manually setting the Address if the IP Mask, Gateway Address and DNS Address remain
unchanged from a previous setup, then these fields may be left blank.
Note: Addresses assigned automatically by a DHCP server may change without warning if the console
or network router is restarted.
Refer to sections "Establishing a LAN Connection to the LWS Console" and "How to put LWS onto a
Network" for step-by-step guide on how to set-up the LWS Console so it can be accessed on your
Local Area Network.
Page 28
Document 36 II LWS-MKIII, pub V5 © Copyright 2012 LPI
Advertisement
Table of Contents
