Table of Contents
Advertisement
Settings:
System Time
It is very important that the LWS time is set accurately to the local time.
This page allows the user to update the System Time of the LWS. Having a correct system time is
important for correlating observed lightning events with those recorded in the event log, and that the
alarms are enabled at the correct times.
There are two time and dates displayed on this page, one is from the computer connected to the
console (which is assumed to have the correct time) and the second is the current LWS time and date.
If these two time and dates are found to be different, then the system time can be set to the correct
time. A time difference of up to a minute is not a problem.
The "Refresh" button will preload the input boxes with the PC's current local time. Pressing the "Set"
button will set the LWS time to the time loaded in the text boxes. This time will be sent to all elements
of the system.
Page 30
Document 36 II LWS-MKIII, pub V5 © Copyright 2012 LPI
Advertisement
Table of Contents
