Table of Contents
Advertisement
Settings:
Alarm Enable Times
This page allows the user to change the time at which Alarm (Warning and All Clear) Indications are
enabled and disabled, so that if lightning events occur during a time when the area is not in use there
will be no unnecessary alarms. Both on and off times are set by simply inputting the required times
and pressing the set button.
Note: All times should be entered in 24 hour format to ensure correct operation. The system will not
process an AM or PM time correctly. The on time must be before the off time.
Please note that it is very important to set the Alarm Enable Times correctly.
Page 34
Document 36 II LWS-MKIII, pub V5 © Copyright 2012 LPI
Advertisement
Table of Contents
