Table of Contents
Advertisement
Settings:
Indication Duration
This page allows the user to change the length of time for Alarm, Warning and All Clear Indications
to occur for. The user has the option of choosing a time (between 5. seconds and 60 seconds) to have
indications enabled for. After the settings have been updated, the Current Indication Duration should
show the time which had just been set, if not then refresh the webpage. If the Duration is still incorrect
select the required time from the drop down list again and allow system to update the settings.
The default Indication Duration is 10 Seconds.
Page 33
Document 36 II LWS-MKIII, pub V5 © Copyright 2012 LPI
Advertisement
Table of Contents
