Changing Battery - Trividia True Metrix Air Owner's Booklet

Changing Battery

A low battery displays Battery Symbol while
continuing to function. A dead battery
displays Battery Symbol, beeps, and then
turns off. To replace battery:
Note: Use non-rechargeable 3V lithium battery (#CR2032).
1. Lift tab on Battery Door.
2. Turn meter over. While holding
meter in one hand with Battery
Door facing down, tap meter
gently on the palm of your other
hand to loosen and remove battery.
3. Discard old battery into
appropriate container.
4. Insert new battery, positive ("+") side facing up. Close
Battery Door.
5. Press " • " Button to turn meter on. Check time,
date, and Test Reminders (see Meter Set Up). If me-
ter does not turn on, check that battery was installed
properly. If not, remove and reinsert battery. Turn
meter on by pressing " • " Button. Contact for as-
sistance if problem persists.
48
Low
Tab
Battery
Door