Control Solution Care; Test Strip Care - Trividia True Metrix Air Owner's Booklet

Stop using the Meter and use the contact information on
the front cover for assistance if:
• Meter display appears cloudy or any display segments
are missing,
• Markings on meter, including back meter label, are
coming off or are missing,
• Buttons are hard to push on the meter or do not work,
• Unable to insert test strip into Test Port,
• Automatic Self-Test gives an error message.

Control Solution Care

• Write date opened on control solution bottle label. Discard
if either 3 months after first opening or date printed next
to on bottle label has passed, whichever comes first.
• Store at room temperature
(2°C-30°C). DO NOT FREEZE.
• After each use, wipe bottle tip clean and recap tightly.
• Discard any control solution bottles that appear cracked or
leaking.

Test Strip Care

• Store test strips in original vial only. Do not transfer test
strips to new vial or store test strips outside of vial.
• Write date first opened on test strip vial label. Discard vial
and unused test strips if either open vial Use By date or
date printed next to on vial label has passed, whichever
comes first.
• Discard any test strip vials that appear cracked or broken.
• Close vial immediately after removing test strip.
• Store in a dry place at room temperature (4°C-30°C)
at 10%-80% relative humidity
(Non-condensing). DO NOT FREEZE.
• Do not reuse test strip.
• Do not bend, cut or alter test strips in any way.
45
30°C
2°C
80%
10%