Quality Control Testing; Automatic Self Test - Trividia True Metrix Air Owner's Booklet

Quality Control Testing

To assure you are getting accurate and reliable results,
the System offers two kinds of quality Control Tests.
These tests let you know that your
System is working properly and your
testing technique is good.
Automatic Self-Test
An Automatic Self-Test is performed
by the meter each time a test strip is
inserted correctly into the Test Port.
Insert a test strip into the Test Port.
The meter is working properly if:
~ the full Display appears, then
~ the time appears in the upper
part of the Display, and then,
~ the Drop Symbol begins to blink.
If an error message appears in the Display,
the meter will not perform a test. See
Troubleshooting or contact for assistance (see
Booklet cover for contact information).
If any segments are missing in the Display
when meter is first turned on, do not use the
meter for testing. Contact for assistance.
16
Contact
Blocks
Face Up
Full Display
Drop Symbol
Error Message