Overlapping Two Pictures - Sony DSR-200A Operating Instructions Manual

Overlapping two pictures

When using the overlap function, the picture gradually fades in over a still picture of
the last scene recorded.
(1) While the digital camcorder is in Standby mode, open the cover, then press
MENU to display the menu in the viewfinder.
(2) Press
(3) Press
(4) Press MENU to erase the menu display.
(5) Press FADER/OVERLAP repeatedly until "OVERLAP" appears in the
viewfinder.
(6) Press START/STOP to start recording.
The scene being shot gradually fades in over the still picture of the last
recorded scene.
1
MENU
DIGITAL F
D ZOOM
MENU 16 : 9WIDE
ZEBRA
TC IND
DATE/TIME
COMMANDER
[ MENU ] : END
5
FADER
FADER/
OVERLAP
To cancel the overlap function
Before pressing START/STOP, press FADER/OVERLAP until the indicator disappears.
Notes on the overlap function
• You cannot use the overlap function while recording with interval recording, cut
recording, or photo recording.
• When in Standby mode select OVERLAP, the digital camcorder automatically goes
into picture search, then the last recorded scene is stored for overlap.
• When you set DIGITAL F to OVERLAP, 16:9WIDE and D ZOOM settings are set to
OFF automatically.
44
or to select DIGITAL F, then press EXECUTE.
or to select OVERLAP, then press EXECUTE.
STBY
2
ZOOM/WIDE
OVERLAP
OVERLAP
3
MENU
DIGITAL F ZOOM/WIDE
OVERLAP
[ MENU ] : END
REC
MENU
DIGITAL F OVERLAP
D ZOOM
16 : 9WIDE
ZEBRA
TC IND
DATE/TIME
COMMANDER
[ MENU ] : END
6
START/STOP
LOCK
STANDBY
PHOTO
STANDBY