Safety Instructions For Installation - Miele KM 3014 Operating And Installation Instructions

Safety instructions for installation

Fit the wall units and cooker hood before fitting the hob to avoid damaging the
hob.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

The hob must not be installed over a fridge, fridge-freezer, freezer,
dishwasher, washing machine, washer-dryer or tumble dryer.

A gas hob must not be installed directly next to a deep fat fryer as
the gas flames could ignite the fat in the fryer. It is essential to
maintain a distance of at least 300 mm between these two
appliances.

When installing the hob, make sure that the gas pipe and
electrical connection cable cannot come into contact with hot
appliance parts.

The electrical cable and any flexible gas connection pipes must be
installed in such a way so that they do not come into contact with
any moving kitchen parts (e.g. a drawer), and cannot become
trapped.

Observe carefully the safety clearances listed on the following
pages.
All dimensions are given in mm.
34