Miele KM 3014 Operating And Installation Instructions page 45

This appliance is set up for connection
to liquefied petroleum gas (LPG) or
town gas (TG) (see label on the
appliance).
Appliances set up for connection to
town gas have the gas governor MDG
ELITRE (model-no. EL-125, pressure
setting at 10 mbar) included.
Connecting the hob
The hob is supplied with a conical ½"
gas connection point for connection to
one of the following:
– Rigid connection with isolation valve
– Flexible connection, maximum length
2000 mm.
Unsuitable sealants may not be leak-
proof.
Connections must be sealed using
appropriate sealant.
Use approved gas tubing bearing
EMSD approval marking (such as:
EMSD APPROVAL GTXXXX) for
connection to appliances, or other
appropriate methods accepted by
EMSD.
Gas connection
c Gas connection R ½"
d 90° bend

According to the Gas Safety
(Registration of Gas Installers and
Gas Contractors) Regulations, any
gas installation work including the
installation of appliances and
connecting tubing, must be
undertaken by a registered gas
installer who is registered for that
appropriate class and is employed
by a registered gas contractor.
45