Intec FORCE/2 HP Instruction Manual page 10

5. Open slide gate & place pin in desired opening.
6. Ensure your system is located on a stable flat surface to maintain even
loading and blowing.
a. Tip - The optional Wheel Kit will assist in moving your FORCE/2.
b. Tip - Some rental customers fasten the FORCE/2 to a pallet in order
ease loading / unloading into a truck or trailer.
7. Agitator's Rubber Flap: Your FORCE/2 comes with a rubber flap
that attaches to one of the agitator paddels. Fasten the rubber
flap to your agitator when you are using cellulose. The purpose
of this flap is to swipe the side of the hopper and prevent
cellulose from bridging.
Remove the flap when you are using fiberglass or stonewool;
keeping the flap installed when using fiberglass or stonewool will cause these fibrous materials
to bunch up against the agitator paddle fastened to the flap causing the agitator to jam and
circuit breaker to trip.
NOTE: Prior to turning the system 'on', make sure the hopper is empty.
Often times reducers, power cords, wired and/or wireless remotes, hose,
and various other tools are left in the hopper. Starting the system with
these items in the hopper can cause damage to the agitator, the airlock,
and to the items left in the hopper.
T: 303-833-6644
Original Language - English
800-666-1611
or
Instruction Manual
www.inteccorp.com
| 9