Installing Outboard - Mercury 9.9 EH Manual

INSTALLATION

Installing Outboard

NOTE: If outboard is a remote control electric start model, follow
instructions in the outboard installation manual (provided with the
outboard) for installing remote steering shift and throttle cables and
remote wiring harness.
INSTALLING OUTBOARD ON TRANSOM
IMPORTANT: Most boats are rated and certified in terms of their
maximum horsepower, and this is shown on the boat's certification
plate, Do not equip your boat with an outboard that exceeds this
limit. If in doubt, contact your dealer. Do not operate the engine
unit until it has been securely mounted on the boat in accordance
with the instructions below.
1. Single engine: Position the outboard motor at the center of
the transom. Mount it using a cushioning pad or plate.
a
37508
a - Boat transom
40