Heat Operation - Mitsubishi Electric City Multi Series Technical & Service Manual

8-4. HEAT OPERATION

RETURN SELECT
MENU
HOLD
.
Control Mode
1. Temperature 1-1. Determining temperature adjustment function (Function to prevent restarting for 3 minutes)
• Room temperature [
adjustment
function
• Room temperature ] Set temperature ···Thermo-OFF
2. Fan By the remote controller setting (switch of 4 speeds+Auto)
4 speeds + Auto type
When [Auto] is set, fan speed is changed depending on the value of:
Give priority to under-mentioned controlled mode
2-1. Hot adjust mode
2-2. Residual heat exclusion mode
2-3. Thermo-OFF mode (When the compressor off by the temperature adjustment function)
2-4. Cool air prevention mode (Defrosting mode)
OCH610G
<How to operate>
1 Press ON/OFF button.
2 Press [F1] button to display HEAT.
3 Press [F2] [F3] button to set the set temperature.
ON
OFF
<How to operate>
1 Press POWER ON/OFF button.
2 Press the operation MODE button to display HEAT.
3 Press the TEMP. button to set the set temperature.
Control Details
Type
Auto
NOTE: The settable temperature range varies with the model of
outdoor units and remote controller.
NOTE: The set temperature changes 1°F when the
button is pressed one time. Heating 63 to 83°F
Fan speed notch
28
or
Remarks
Continue to the next page