Fan Operation - Mitsubishi Electric City Multi Series Technical & Service Manual

8-3. FAN OPERATION

RETURN SELECT
MENU
HOLD
.
Control Mode
1. Temperature Set by remote controller.
adjustment
function
4 speeds + Auto type
When [Auto] is set, fan speed becomes [Low].
2. Drain pump 2-1. Drain pump control
1 ON for 3 minutes after the operation mode is switched from COOL or DRY to another
operation mode (FAN).
2
control judges the sensor is in the water.
2-2. Float switch control
• Float switch control judges whether the sensor is in the air or in the water by turning the
3. Vane Same as the control performed during the COOL operation, but with no restriction on the vane's
(up/down vane
downward blow setting
change)
OCH610G
<How to operate>
1 Press ON/OFF button.
2 Press [F1] button to display FAN.
ON
OFF
<How to operate>
1 Press POWER ON/OFF button.
2 Press the operation MODE button to display FAN.
Control Details
Type
Auto
Fan speed notch
27
Remarks
• Operates as it would
in COOL operation.