Advertisement
ASSEMBLY INSTRUCTIONS FOR JOY 2 SPINNING WHEEL
SINGLE & DOUBLE TREADLE WITH A SLIDING HOOK FLYER
Your Joy 2 spinning wheel has been lacquered prior to assembly. If desired, the application of Ashford Wax Finish
may further enhance its appearance.
Parts
2
x
Disengage the latch.
Note: The screw on the
treadle board has been
tightened for shipping.
Loosen the screw, fold
the treadle board down
and lock the metal stays
into position.
Slide the clear sleeves
over the joint to secure
the metal stays.
Thread the 2 hooks into
the pilot holes in the
flyer base. Squeeze and
slide the stainless steel
yarn guides onto the
flyer arms.
2
x
2
x
Tension knob
2
Brake band
Threading hook
Advertisement
