Table of Contents
Advertisement
B
Technical Specifications
NOTE:
All performance specifications are provided by the component manufacturers. Performance
specifications represent the highest specification of all HP's component manufacturers' typical level
specifications for performance and actual performance may vary either higher or lower.
HP Dual Output USB Graphics Adapter
Host Interface
Video Interface
Connectors
Connectivity
RAM
Power Mode
Operating System Support
Supported Modes
Resolutions, Refresh Rate, and
Color Depth
Housing
Dimensions
USB Cable
Operating Temperature
Storage Temperature
Operating Humidity
Non-Operating Humidity
EMC
Agency Approvals
RoHS
USB 3.0 (backward compatible to USB
2.0); USB cable included
DisplayPort; DVI-I or VGA
Video output: 1) DisplayPort and 2) DVI-I 24pin + 5pin Female Connector or VGA
HDDE 15pin Female Connector
Host upstream link: USB 3.0 Micro B Connector
Up to 6 monitors can be supported with 3 adapters on a computer
8M x 16 DDR Synchronous DRAM (SDRAM)
Bus-powered
Refer to
System Requirements on page 3
Extend (Default), Mirror, Primary Display
Refer to
Adjusting Resolution, Color Depth and Refresh Rate on page 10
Plastic
9.45 (L) x 8.14 (W) x 2.01 (H) cm
USB 3.0 Y cable, 1.8m (6 ft)
0-40°C
-10~+70°C
20% to 80%
5% to 95%
●
FCC Part 15 Class B, IC ICES-003
●
CE (EN55022, EN61000, EN55024)
FCC, CE, VCCI, KC, C-Tick, UL
RoHS compliant
3.72 (L) x 3.2 (W) x .79 (H) inches
32-104°F
14~+158°F
HP Dual Output USB Graphics Adapter
17
Advertisement
Table of Contents
