Table of Contents
Advertisement
To connect to the target system
Plug the probe adapter into the 190-pin Mictor connector on the
4
Instrumented Interposer board (see illustration below).
Damage to the connectors on the target system and probe adapter can result
C A U T I O N
from incorrect connection. Note the position of Pin 1 of the 190-pin Mictor
connectors on the probe adapter and target system prior to making any
connection. Also, take care to align the probe adapter connector with the
pins on the target system connector so that all pins are making contact.
Connecting the probe adapter to the Instrumented Interposer board
9
Advertisement
Table of Contents
