Configuring The Websense Content Filter List; Websense Server Status; Settings - SonicWALL Internet Security Appliances Administrator's Manual

Configuring the Websense Content Filter List

Configure the Websense Enterprise settings on this page.

Websense Server Status

This section displays the status of the Websense Enterprise server used for content filtering.

Settings

Server Host Name or IP Address
Enter the Server Host Name or the IP address of the Websense Enterprise server used for the
Content Filter List.
Server Port
Enter the UDP port number for the SonicWALL to "listen" for the Websense Enterprise traffic. The
default port number is 15686.
User Name
To enable reporting of users and groups defined on the Websense Enterprise server, leave this field
blank. To enable reporting by a specific user or group behind the SonicWALL, enter the User Name
configured on the Websense Enterprise Server for the user or group. If using NT-based directories
on the Websense Enterprise Server, the User Name is in this format, for example:
NTLM:\\domainname\username. If using LDAP-based directories on the Websense Enterprise
server, the User Name is in this format, for example: LDAP://o-domain/ou=sales/username.
If you are not sure about the entering a user name in this section, leave the field blank and consult
your Websense documentation for more information.
Page 112 SonicWALL Internet Security Appliance Administrator's Guide