Table of Contents
Advertisement
Status
The Status tab displays dial-up connection information when the modem is active.
Modem Status
In the Modem Status section, the current active network information from your ISP is displayed
when the modem is active:
•WAN Gateway (Router) Address
•WAN IP (NAT Public) Address
•WAN Subnet Mask
•DNS Server 1
•DNS Server 2
•DNS Server 3
•Current Active Dial-Up Profile (id)
•Current Connection Speed
If the modem is inactive, the Status page displays a list of possible reasons that your modem is
inactive. When the modem is active, the network settings from the ISP are used for WAN access. If
you click General, then Network, a message is displayed reminding you that the modem is active
and the current network settings are displayed on the Modem Status page.
Configuring the TELE3 SP Modem Connection Page 69
Advertisement
Table of Contents
