Table of Contents
Advertisement
Change Damp Time (seconds) field. The default value is 30 seconds. A lower value corresponds
with a higher volume of broadcast traffic over the network.
•
Deleted Route Advertisements - enter the number of advertisements that a deleted route
broadcasts until it stops in the Deleted Route Advertisements field. The default value is 5.
•
Route Metric (1-15) - Enter a value from 1 to 15 in the Route Metric field. This is the number of
times a packet touches a router from the source IP address to the destination IP address.
•
RIPv2 Route Tag (4 Hex Digits) - If RIPv2 is selected from the Route Advertisements menu, you
can enter a value for the Route Tag. This value is implementation-dependent and provides a
mechanism for routers to classify the originators of RIPv2 advertisements. This field is optional.
RIPv2 Authentication
You can enable RIPv2 Authentication by selecting the type of authentication from the menu:
•
User defined - Enter 4 hex digits in the Authentication Type (4 hex digits) field. Enter 32 hex
digits in the Authentication Data (32 Hex Digits) field.
•
Cleartext Password - Enter a password in the Authentication Password (Max 16 Chars) field. A
maximum of 16 characters can be used to define a password.
•
MD5 Digest - Enter a numerical value from 0-255 in the Authentication Key-Id (0-255) field. En-
ter a 32 hex digit value for the Authentication Key (32 hex digits) field, or use the generated key.
DMZ Route Advertisement
All of the information and configuration instructions for LAN Route Advertisement apply to DMZ
Route Advertisement configuration.
DMZ Addresses
Note: For the SonicWALL PRO 100, PRO 200, PRO 300, PRO 230, PRO 330, and GX series only
The SonicWALL provides security by preventing Internet users from accessing machines on the LAN.
This security, however, also prevents users from reaching public servers, such as Web or e-mail
servers.
The SonicWALL offers a special DMZ ("Demilitarized Zone") port that provides Internet access to
network servers. The DMZ sits between the local network and the Internet. Servers on the DMZ are
publicly accessible, but they are protected from attacks such as SYN Flood and Ping of Death. Use
of the DMZ port is optional.
Tip If you are configuring the SonicWALL SOHO3 or the SonicWALL TELE3, please go to Chapter 8,
Network Access Rules, for information about setting up publicly accessible servers.
Using the DMZ is a strongly recommended alternative to placing servers on the WAN port where they
are not protected or established Public LAN servers.
Page 156 SonicWALL Internet Security Appliance Administrator's Guide
Advertisement
Table of Contents
